Description
Bullet Points:
1.Operate Quietly: You can use the Wood Stove Fan to spread the heat around the room and raise the temperature with low noise, improve heating air circulation for greater comfort, and reduce the wood consumption of the stove. It's very quiet and goes unnoticed in any room. It's more stable, safe, and noise-free, and you can enjoy the warmth of a small wood stove with peace of mind.
2.Nice Material: The fireplace Fan requires no batteries or utility power, the thermoelectric module acts as a small generator to power the fireplace fan. It is made of anodized aluminum for rust resistance, wear resistance and good thermal conductivity.
3.Simple to Use: You can simply place Log Burner Fan on a burning log and enjoy the warm room as your fan will use the heat from the log burning stove to circulate warm air. It can be installed on top of any stove or log burner with no setup required.
4.Multiple Uses: Stove Fan allows you to get the most heat out of your wood-burning stove. It requires no batteries or electricity, just heat from the stove fan, suitable for wood-burning stoves, pellet stoves, etc.
5.Fit Fireplace: The maximum temperature Silent Fire Place Fan can withstand is 350-400 degrees. Exceeding this temperature may damage the motor. If the fan does not run in time after it reaches the temperature, do not touch it directly with your hands, please move the blades gently.
Working Principle:
Thermoelectric furnace fans use thermoelectric technology to convert temperature differences into electrical energy. There is a unique thermoelectric module in the center of the fan. When heated, the module generates hot and cold sides, allowing electrons to flow into the module and generate electricity to operate the fan.
This is also known as the Seebeck effect
Note: The furnace fan does not bring about a direct temperature increase, but is only a tool to accelerate heat transfer from the chimney.
Specification:
1. Metal handle 2. Heat sink 3. Bi-metal thermal insulation
Model: BLFS
Color: Black
Power supply equipment: thermoelectric module (thermal power supply)
Airflow: Aluminum
Airflow: 203CFM
Initial temperature: 40℃
Working temperature: 50-370℃
Noise level: 15-18db
Recommended distance: 10-15cm/3.94-5.91in
Size: About 110x215x185mm/ 4.3x8.5x7.3in
Packing List:
Fireplace Fan * 1
1.Operate Quietly: You can use the Wood Stove Fan to spread the heat around the room and raise the temperature with low noise, improve heating air circulation for greater comfort, and reduce the wood consumption of the stove. It's very quiet and goes unnoticed in any room. It's more stable, safe, and noise-free, and you can enjoy the warmth of a small wood stove with peace of mind.
2.Nice Material: The fireplace Fan requires no batteries or utility power, the thermoelectric module acts as a small generator to power the fireplace fan. It is made of anodized aluminum for rust resistance, wear resistance and good thermal conductivity.
3.Simple to Use: You can simply place Log Burner Fan on a burning log and enjoy the warm room as your fan will use the heat from the log burning stove to circulate warm air. It can be installed on top of any stove or log burner with no setup required.
4.Multiple Uses: Stove Fan allows you to get the most heat out of your wood-burning stove. It requires no batteries or electricity, just heat from the stove fan, suitable for wood-burning stoves, pellet stoves, etc.
5.Fit Fireplace: The maximum temperature Silent Fire Place Fan can withstand is 350-400 degrees. Exceeding this temperature may damage the motor. If the fan does not run in time after it reaches the temperature, do not touch it directly with your hands, please move the blades gently.
Working Principle:
Thermoelectric furnace fans use thermoelectric technology to convert temperature differences into electrical energy. There is a unique thermoelectric module in the center of the fan. When heated, the module generates hot and cold sides, allowing electrons to flow into the module and generate electricity to operate the fan.
This is also known as the Seebeck effect
Note: The furnace fan does not bring about a direct temperature increase, but is only a tool to accelerate heat transfer from the chimney.
Specification:
1. Metal handle 2. Heat sink 3. Bi-metal thermal insulation
Model: BLFS
Color: Black
Power supply equipment: thermoelectric module (thermal power supply)
Airflow: Aluminum
Airflow: 203CFM
Initial temperature: 40℃
Working temperature: 50-370℃
Noise level: 15-18db
Recommended distance: 10-15cm/3.94-5.91in
Size: About 110x215x185mm/ 4.3x8.5x7.3in
Packing List:
Fireplace Fan * 1
Enlace proporcionado por:
